Woodworking Bandsaw Cutting Pallet Wood Block Cutting machine

Introduction of Pallet Block Cutting Machine / Wood Block Cutting machine

Pallet block cutting machine/Wood Block Cutting machine is suitable for processing shavings pallet blocks, solid woods, multi-layer woods. Pallet block cutting machine is stable, efficient, safe, and simple, and so on. And it is also dominant in wood pallet processing equipment.

Technical Parameters of Pallet Block Cutting Machine / Wood Block Cutting machine

Model TY-1250DP
Capacity 5 m3/hour
Overall dimension 1960*1560*1360 mm
Main motor power 22 kW
Feeding motor power 1.1 kW
Max cut length 1250 mm
Max cut width 200 mm
Max cut thickness 110 mm
Speed of mainshaft 3000 r/min
Precision 0.5 mm
Feeding speed 7 s/cut
Voltage 380 V, 50 Hz, 3P
Blade size/quantity 355*3.2*60T*30/14 pcs
Net weight 1100 kg

Features of Pallet Block Cutting Machine / Wood Block Cutting machine

  1. High production efficiency, with cutting 5 m3 in one hour.
  2. The bullet-proof chain is installed at the inlet to prevent the wood chips from rebounding. And the slope is installed at the discharge port, and the discharge is smooth, preventing the wood from flying out.
  3. There is a safety shield on the top of pallet block cutting machine, so it is safer to place the wood.
  4. The whole process is automatic feeding, the upper and lower shaft structure, multi-piece sawing, continuous discharging, so the efficiency is increased by 5-6 times, and the sawing road is thinner than other machines.
  5. The multi-blade sawing process is stable, the sawing precision is high, the surface is smooth and flat, no need to re-process, and reducing wood waste.
  6. The power-enhanced feeding conveyor is strong and powerful, reducing the labor intensity of workers and making the sawing logs more stable.
  7. Chain plate/chain feeding, and navigation sheet discharge, is suitable for processing shorter wood. The feeding chain penetrates the machine frame, and the whole chain feeding can cut the shorter wooden side and the sawing is smoother. Pallet block cutting saw can make it more economical than other types of multi-blade saws.
  8. The operation greatly saves labor and improves the utilization rate of the wood. When feeding, the wood is pressed up and down, and the cutting is stable.

Wood Block Cutting machine

Advantages of Pallet Block Cutting Machine / Wood Block Cutting machine

  1. Unique conveyor chainplate.
  2. The pallet block automatically falls and increases the yield. Graphic design, increase friction, grab wood for stable feeding.
  3. The main shaft is treated by dynamic balance, so the balance precision is stable. The specification of the output plate is accurate and the surface of the output plate is smooth.
  4. Imported saw blade steel plate, lower working vibration, not easy to deform, burnout
  5. Imported alloy cutter head, sharper and wear-resistant
  6. Ultra-thin sawing for higher sawing efficiency and less material loss
  7. High-distribution motor, full copper coil, imported gear, high electromagnetic power, low temperature, and large torque, powerful.

Wood Block Cutting machine

Pallet block size is 90*90 mm, 90*100 mm, 100*100 mm, 80*90 mm. If you have special requirements, we could customize, while it is at the range from 75 mm to 145 mm. Besides, one pallet block machine could make two different sizes block.

Leave a Message